Àý¿¬ÀúÇ×ÃøÁ¤±â¿¡ Fluke¸ÖƼ¹ÌÅÍ°¡ ÇÑ Àåºñ·Î ÇÕÃÄÁø Àý¿¬ÀúÇ× ¸ÖƼ¹ÌÅÍ ¿ø°ÝÇÁ·çºê¸¦ »ç¿ëÇÏ¿© ÇÁ·çºê¿¡¼ Àý¿¬Å×½ºÆ®¸¦ ÇÒ ¼ö ÀÖ½À´Ï´Ù
|
|
|
Àý¿¬ÀúÇ×ÃøÁ¤±â¿¡ Fluke¸ÖƼ¹ÌÅÍ°¡ ÇÑ Àåºñ·Î ÇÕÃÄÁø Àý¿¬ÀúÇ× ¸ÖƼ¹ÌÅÍ ¿ø°ÝÇÁ·çºê¸¦ »ç¿ëÇÏ¿© ÇÁ·çºê¿¡¼ Àý¿¬Å×½ºÆ®¸¦ ÇÒ ¼ö ÀÖ½À´Ï´Ù.
*Àý¿¬ÀúÇ× ÃøÁ¤
1507: 0.01 M§Ù to 10 G§Ù 1503: 0.1 M§Ù to 2000 M§Ù
* Å×½ºÆ® Àü¾Ð
1507: 50 V, 100 V, 250 V, 500 V, 1000 V 1503: 500 V, 1000 V
* Àü¾ÐÃøÁ¤ : 0.1 V to 600 V * Àü·ùÃøÁ¤ : 200 mA * ÀúÇ×ÃøÁ¤ : 0.01 §Ù to 20.00 k§Ù * ¿ÀÅäOFF ±â´É * 30V À̻󿡼 ÃøÁ¤½Ã °æ°í
AC/DC Voltage Measurement |
Accuracy |
Range |
600.0 V |
Resolution |
0.1 V |
50 Hz to 400 Hz ¡¾ (% of Rdg + Digits) |
¡¾ (2 % + 3) | |
Input impedance |
|
3 M¥Ø (nominal), < 100 pF | |
Common mode rejection ratio (1 k¥Ø unbalanced): |
|
> 60 dB at dc, 50 or 60 Hz | |
Overload Protection |
|
Earth bond resistance measurement |
Range/Resolution |
20.00 ¥Ø |
0.01 ¥Ø |
200.0 ¥Ø |
0.1 ¥Ø |
2000 ¥Ø |
1.0 ¥Ø |
20.00 k¥Ø |
0.01 k¥Ø | |
Accuracy |
|
Overload Protection |
|
Open Circuit Test Voltage |
|
Short circuit current |
|
Insulation specifications |
Measurement Range |
1507: |
0.01 M¥Ø to 10 G¥Ø |
1503: |
0.01 M¥Ø to 2000 M¥Ø | |
Test voltages |
1507: |
50 V, 100 V, 250 V, 500 V, 1000 V |
1503: |
500 V, 1000V | |
Test Voltage Accuracy |
|
Short circuit current |
|
Auto Discharge |
|
Discharge time < 0.5 second for C = 1 µF or less | |
Live circuit indicator |
|
Inhibit test if terminal voltage > 30 V prior to initialization of test | |
Maximum Capacitive Load |
|
Operable with up to 1 µF load | |
Measure Accuracy: |
50 V: |
¡¾(3 % + 5) |
100 V: |
¡¾(3 % + 5) |
250 V: |
¡¾(1.5 % + 5) |
500 V: |
¡¾(1.5 % + 5) |
1000 V: |
¡¾(1.5 % + 5) to 2000 M¥Ø, ¡¾(10 % + 3) above 2000 M¥Ø | |
General Specifications |
Maximum voltage applied to any terminal: |
|
Storage Temperature |
|
-40 ¡ÆC to 60 ¡ÆC (-40 ¡ÆF to 140 ¡ÆF) | |
Operating Temperature |
|
-20 ¡ÆC to 55 ¡ÆC (-4 ¡ÆF to 131 ¡ÆF) | |
Temperature Coefficient |
|
0.05 x (specified accuracy) per ¡ÆC for temperatures < 18 ¡ÆC or > 28 ¡ÆC (< 64 ¡ÆF or > 82 ¡ÆF) | |
Relative Humidity |
|
0 % to 95 % @ 10 ¡ÆC to 30 ¡ÆC (50 ¡ÆF to 86 ¡ÆF) |
|
0 % to 75 % @ 30 ¡ÆC to 40 ¡ÆC (86 ¡ÆF to 104 ¡ÆF) |
|
0 % to 40 % @ 40 ¡ÆC to 55 ¡ÆC (104 ¡ÆF to 131 ¡ÆF) | |
Vibration |
|
Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument | |
Shock |
|
1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor) | |
Electromagnetic compatibility: |
|
In an RF field of 3 V/M, accuracy = specified accuracy (EN 61326-1:1997) | |
Safety |
|
Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV) | |
Certifications: |
|
CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition | |
Batteries |
|
Four AA batteries (NEDA 15A or IEC LR6) | |
Battery Life |
Insulation test use: |
Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 M¥Ø with a duty cycle of 5 seconds on and 25 seconds off. |
Resistance measurements: |
Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room temperature. These are standard tests of 1 ¥Ø with a duty cycle of 5 seconds on and 25 seconds off. | |
Size |
|
5.0 cm H x 10.0 cm W x 20.3 cm L (1.97 in H x 3.94 in W x 8.00 in L) | |
Weight |
|
IP Rating |
|
Altitude |
Operating: |
2000 m CAT IV 600 V, 3000 m CAT III 600 V |
Non-operating (storage): |
12,000 m | |
Over-range capability: |
|
Included accessories: |
|
TL224 Test Leads, TP74 Test Probes, clips PN 1958654 (red) and PN 1958646 (black), holster and remote probe | | | | |