|
6020 |
6030 |
6020/30 |
Insulation Test Specifications |
Test Voltage |
125V/250V |
250V/500V |
1000V |
Measuring Ranges (M¥Ø) |
0 ~1.999M¥Ø 1.00 ~19.99M¥Ø 10.0 ~199.9M¥Ø |
0 ~19.99M¥Ø 10.0 ~199.9M¥Ø 100 ~1999M¥Ø |
(3 auto ranges) |
Accuracy |
|¡¾2%rdg ¡¾3dgt, ¡¾10%rdg (on 1000~2000M¥Ø) |
Open Circuit Voltage |
+20% -0% of Rated Test Voltage |
Rated Test current |
1mA DC +20%-0% |
Short Circuit current |
1.3mA DC approx. |
Effect of AC Component of Terminal Voltage |
Within ¡¾10% of reading when 5µF capacitor is connected in parallel on insulation test |
Overload Protection |
1200V (DC + ACp-p) for 10 seconds |
Earth Resistance Test Specifications |
Measuring Ranges(¥Ø) |
0 ~199.9¥Ø 100 ~1999¥Ø (2 auto ranges) |
Accuracy |
|¡¾2%rdg ¡¾3dgt (at 500¥Ø auxiliary earth resistance) |
Measuring Method |
By constant current inverter 820Hz approx. 2mA approx. |
Overload Protection |
200V AC for 10 seconds between measuring terminals |
Voltage Test Specifications |
Measuring Ranges (V) |
0 ~ 199.9/100 ~ 600V (2 auto ranges) |
Accuracy |
|¡¾1%rdg ¡¾4dgt |
Sensing |
True RMS |
Input Impedance |
2M¥Ø |
Overload Protection |
900V AC for 1 minute |
Phase Check Specifications |
Measuring Range |
100 ~ 600V (50Hz/60Hz) (for checking correct or reverse phase and open phase) |
General |
Display |
3 1/2(1999)digit large LCD |
Response Time |
Approx. 4 seconds for AC voltage and earth resistance tests Approx. 5 seconds for insulation resistance tests. |
Withstand Voltage |
5550V AC for one minute |
Effect of Drop |
No electrical and mechanical damage shall occur when the unit is dropped from a height of 1 m onto the concrete floor. |
Effect of Temperature |
Readings shall not differ greater than specified below when taken at a reference temperature of 23¨¬C and varied temperature of 0¨¬C and 40¨¬C. AC Voltage 3% ¡¾2 dgt insulation resistance and earth resistance 5% ¡¾2 dgt |
Operating Temperature Range |
0-40¨¬C |
Dimensions |
130 ¡¿ 238 ¡¿ 207mm (main body plus cord reel module) 105 ¡¿ 238 ¡¿ 207mm (main body only) |
Weight |
Approx. 1.6kg (main body only) Approx. 750g (cord reel module only) |
Power Supply |
1.5V LR6 alkaline battery or equivalent ¡¿ 8 (for main body only) 1.5V LR6 alkaline battery or equivalent ¡¿ 1 (probe only) |
Safety Standard |
IEC 61010-1 CAT.III 600V Pollution Degree 2 |
Optional |
2417(Water Proof Leakage Clamp Meter) 7093(Cord for Extension Probe) 9080(Aluminum Carrying Case) |